Greetings all, We are designing an instrument for laboratory use that will use liquid nitrogen. We will need to design our own dewar system too.
Being new to the use of liquid nitrogen we want to make sure we apply all the necessary safety requirements to our product. We have searched the internet and have found the MSDS and several websites that give safety suggestions to avoid burns, over pressure of the container, and asphyxiation. Is there any standards that we should apply other than the normal EN61010-1 and equivilent? Does any country have special requirements that we need to keep in mind? Thanks, Brian Kunde LECO ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on "browse" and then "emc-pstc mailing list"
