Dave,
A follow up question on the same topic. I haven't had a chance to look at
the EN standards.  You stated the only harmonized standards listed under
94/62 are EN's 13428 and 13432.  It appears that someone is asking Lyle for
a declaration of conformity, is this a self declaration for using certain
materials in their packaging?

Thanks, 

Kati Wenzel


-----Original Message-----
From: [email protected]
[mailto:[email protected]]
Sent: Friday, August 02, 2002 5:50 AM
To: Luttrell, Lyle; [email protected]
Subject: Re: Packaging for Czech Republic - Ecological Law 477/2001



Hi Lyle,
As an EU accession state I expect that 477/2001 is the Czech transposition
of the EU directive on packaging and packaging waste (94/62/EC). The only
harmonised standards listed under 94/62 are EN's 13428 and 13432.
Regards,

Dave Graham.

----- Original Message -----
From: Luttrell, Lyle <[email protected]>
To: <[email protected]>
Sent: Thursday, August 01, 2002 8:22 PM
Subject: Packaging for Czech Republic - Ecological Law 477/2001


>
> Hello group,
> I just received an inquiry regarding compliance with a new ecological law
#
> 477/2001 in the Czech Republic concerning packaging of goods.
> Apparently the law sets requirements on design and marking of packaging
and
> preparation of a declaration and other reporting requirements.
> The standards are listed below; they are not ones that I am familiar with.
> The products we are selling are ITE (tape automation systems).
>
> Does anyone have experience with this yet? Any idea of what the effective
> date is?
>
> Extract from inquiry:
> We are obliged to sign a declaration stating that the packaging is
complying
> or not with the law in general and with each of the standards, describing
> the contents of the packaging and stating that we have all the technical
> documents of the packaging and we are able to show them to the control
> authority.
>  We need a separate declaration for every group of packaging that would
> describe used material of packaging and state whether the packaging is
> compliant to each of the standards or not.
> We have been informed that the standards and declaration should be similar
> to the European standards. The declaration form should be the appendix B
of
> the standard EN 13427.
> Standards to meet are:
> 1. EN 13428. EN 13427
> 2. EN 13429
> 3. EN 13430
> 4. EN 13431
> 5. EN 13432, EN 13428
> 6. EN 13428, EN 13695-2
> 7. EN 13695-1
> We have the obligation of record keeping and the obligation to get back
the
> packaging from the end customer for free. One way to cover this duty is to
> contract a company newly authorized by the law whom we pay for their
> services. To get registered and serviced we have to report the amount of
> sold packaging in tons sorted by the used material. The registration is
> necessary for customs officers.
>
>
> Lyle Luttrell, PE
> Quality/Reliability/Compliance Engineer
> PeAk Storage Solutions, a Division of MaxOptix
> 246 South Taylor Avenue
> Louisville, CO 80027
> Phone:  303-664-8286
> Fax:  303-664-8299
>
>
> -------------------------------------------
> This message is from the IEEE EMC Society Product Safety
> Technical Committee emc-pstc discussion list.
>
> Visit our web site at:  http://www.ewh.ieee.org/soc/emcs/pstc/
>
> To cancel your subscription, send mail to:
>      [email protected]
> with the single line:
>      unsubscribe emc-pstc
>
> For help, send mail to the list administrators:
>      Ron Pickard:              [email protected]
>      Dave Heald:               [email protected]
>
> For policy questions, send mail to:
>      Richard Nute:           [email protected]
>      Jim Bacher:             [email protected]
>
> All emc-pstc postings are archived and searchable on the web at:
>     http://ieeepstc.mindcruiser.com/
>     Click on "browse" and then "emc-pstc mailing list"
>
>


-------------------------------------------
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.

Visit our web site at:  http://www.ewh.ieee.org/soc/emcs/pstc/

To cancel your subscription, send mail to:
     [email protected]
with the single line:
     unsubscribe emc-pstc

For help, send mail to the list administrators:
     Ron Pickard:              [email protected]
     Dave Heald:               [email protected]

For policy questions, send mail to:
     Richard Nute:           [email protected]
     Jim Bacher:             [email protected]

All emc-pstc postings are archived and searchable on the web at:
    http://ieeepstc.mindcruiser.com/
    Click on "browse" and then "emc-pstc mailing list"

Reply via email to