Try this link for a start http://www.customs.ustreas.gov/imp-exp2/import/marking.htm
Robert Sem Sr. Product Regulations Engineer Intel Corporation 5200 NE Elam Young Pkwy. MS JF#-410 Hillsboro, OR 97124 U.S. Phone (503) 264-4430 Fax (503) 264-0124 [email protected] -----Original Message----- From: [email protected] [mailto:[email protected]] Sent: Thursday, July 18, 2002 4:22 PM To: [email protected] Subject: "made in xxxx" requirements? This is not my usual area of interest, but a question came up about regulations for country of origin marking, either in the US or EU. Can anyone point me in the direction of an answer? Thanks all, Brent DeWitt Datex-Ohmeda Louisville, CO ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on "browse" and then "emc-pstc mailing list" ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on "browse" and then "emc-pstc mailing list"
