I don't know the particulars, but that line is old. It is the Stoddart/Singer/Ailtech/Eaton/Tegam/ETS line. The basic 91550-1 model dates back at least 50 years, so you are not looking at new technology, although I expect that ferrite vendors have changed over the years. I used to be the customer support when Tegam owned the line and I might be able to dig some of that info out if someone else doesn't come up with useful answers first.
on 7/16/02 6:33 PM, POWELL, DOUG at [email protected] wrote: > > Hello all, > > I was wondering if anyone knows where EMCO gets the ferrite from their clamp > on current probes cut. Or anything about the core itself. > > thanks, > > -doug > > _______________________________________________________________ > This message, including any attachments, may contain information > that is confidential and proprietary information of Advanced > Energy Industries, Inc. The dissemination, distribution, use > or copying of this message or any of its attachments is > strictly prohibited without the express written consent of > Advanced Energy Industries, Inc. > > ------------------------------------------- > This message is from the IEEE EMC Society Product Safety > Technical Committee emc-pstc discussion list. > > Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ > > To cancel your subscription, send mail to: > [email protected] > with the single line: > unsubscribe emc-pstc > > For help, send mail to the list administrators: > Ron Pickard: [email protected] > Dave Heald: [email protected] > > For policy questions, send mail to: > Richard Nute: [email protected] > Jim Bacher: [email protected] > > All emc-pstc postings are archived and searchable on the web at: > http://ieeepstc.mindcruiser.com/ > Click on "browse" and then "emc-pstc mailing list" > -- Ken Javor EMC Compliance Huntsville, Alabama 256/650-5261 ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on "browse" and then "emc-pstc mailing list"
