A couple of months ago, I asked the group if I should be using EN60650-1. The answer was "no", until and unless the particular part was published that covered my product. In other words, the new edition is incomplete and subsequent parts will need to be published before it can be used instead of the current edition.
Richard Woods Sensormatic Electronics Tyco International -----Original Message----- From: Brian O'Connell [mailto:[email protected]] Sent: Monday, July 15, 2002 9:25 AM To: [email protected] Subject: RE: EN60950 3rd vs EN60950-1 In my copy of EN 60950-1:2002, purchased from BSI, the DoP is listed as December 01, 2002. R/S, Brian O'Connell Taiyo Yuden (USA), Inc. -----Original Message----- From: Ron Pickard [mailto:[email protected]] Sent: Friday, July 12, 2002 3:10 PM To: [email protected] Subject: Re: EN60950 3rd vs EN60950-1 Hi Allen, Thanks for your reply, however, I highly doubt that these products will be obsoleted by then, which is the source of my concern and my query. Also, at some standards purchasing houses, I've noticed that EN60950 3rd Edition has been, or is being, superceded by EN60950-1. This has caused me to ask the question of OJ publication. Best regards, Ron Pickard [email protected] ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on "browse" and then "emc-pstc mailing list" ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on "browse" and then "emc-pstc mailing list"
