Hi Gary, Is this just a pass thru port or will the system have any functionality on the port (e.g. automatic dialing)?
Best regards, Garry Hojan CEO/ President Strategic Compliance Services (SCS) a Division of NRL, L.L.C. 11402 E Mariposa Rd. Stockton, CA 95215 Tel: 209-465-0619 Fax: 209-812-1931 Mobile: 209-662-4322 Email: [email protected] Web: www.regulatory-compliance.com -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Gary McInturff Sent: Friday, July 12, 2002 8:51 AM To: EMC-PSTC (E-mail) Subject: IP phone interfaces. We have a device that in the case of power loss, will release a relay contact that will connect a standard phone to phone lines. Under normal operation there is no connection, voice is digitized and Ethernet Packatized and sent out fiber optic cables. We do not design or supply the phone, which would have to have all of the FCC part 68 and RT &T directives met. We just allow a copper path to be made. So my first thoughts are that I am closer to being just a hunk of telephone hook-up wire than a phone or modem, but I will need to protect the physical relay inside my box appropriately, meeting the ITE standard UL 60950 and EN 60950 appropriately, but not the full requirements of the other referenced standards. What say ye sages? Thanks Gary ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on "browse" and then "emc-pstc mailing list" ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on "browse" and then "emc-pstc mailing list"
