Dear Colleagues! My experience base is in ITE using the 60950, NEC and EMC standards. A potential new job may be an application to farm irrigation systems (i.e. center pivot types). The electrical and EMC standards would apply to control panel systems and associated wiring but would there be a machine directive that covers anything here? (domestic and international) My feeble attempt at searching for standards that may apply only turns up the G1695 but this is electrical not mechanical and is nearly 10 yrs old.
Thanks in Advance, Kyle Ehler / Kansas (unemployed PSE) [email protected] ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on "browse" and then "emc-pstc mailing list"
