John W The simple answer is that in my personal opinion, the answer to your question is (and has been for many years)- "YES", for the reasons stated in original posting and as expanded in my email sent a few minutes ago to Rich & Gert!
Regards John Allen -----Original Message----- From: John Woodgate [mailto:[email protected]] Sent: 19 September 2002 16:51 To: [email protected] Subject: Re: Question: Discharge capacitance 0.1 uF I read in !emc-pstc that John Allen <[email protected]> wrote (in <BFE68AB0084CD311B4FB00508B014C8703CF9BEE@MERCURY>) about 'Question: Discharge capacitance 0.1 uF' on Thu, 19 Sep 2002: >Now, maybe, the standards writing committees will begin to take this issue >on board and do something about it Are you saying that the present requirements (e.g. in EN60065) are unsatisfactory? In what way? -- Regards, John Woodgate, OOO - Own Opinions Only. http://www.jmwa.demon.co.uk Interested in professional sound reinforcement and distribution? Then go to http://www.isce.org.uk PLEASE do NOT copy news posts to me by E-MAIL! ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on "browse" and then "emc-pstc mailing list" _____________________________________________________________________ This e-mail has been scanned for viruses by the WorldCom Internet Managed Scanning Service - powered by MessageLabs. For further information visit http://www.worldcom.com ************************************************************************* Copyright ERA Technology Ltd. 2002. (www.era.co.uk). All rights reserved. The information supplied in this email should be treated in confidence. No liability whatsoever is accepted for any loss or damage suffered as a result of accessing this message or any attachments. _____________________________________________________________________ This e-mail has been scanned for viruses by the WorldCom Internet Managed Scanning Service - powered by MessageLabs. For further information visit http://www.worldcom.com ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on "browse" and then "emc-pstc mailing list"
