Basic standards do not provide the presumption of compliance with the essential requirements. Only generic, family or product standards can do that. If you component is legally subject to a directive, then you must apply the appropriate generic, family or product standard or use the Tecnical Construction File route. The standards that you apply will depend, as you say, upon the end applications that you envision for your component. You may have to use several family standards. If your component is not legally subject to a directive, you only have to do what is necessary to keep your customers happy.
Richard Woods Sensormatic Electronics Tyco International -----Original Message----- From: Brian O'Connell [mailto:[email protected]] Sent: Tuesday, February 05, 2002 10:15 AM To: [email protected] Subject: EMC stds Good People of EMC-PSTC: Current D of C for a component SMPS lists basic stds (e.g., 61000-4-x), but customer wants product family stds listed. Based on my limited understanding of ITE EMC stds (55022/4), it would seem that only referenced basic stds can be listed; and that the product family std can only apply to the end-use item. Correct? Comments appreciated. R/S, Brian ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Michael Garretson: [email protected] Dave Heald [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: No longer online until our new server is brought online and the old messages are imported into the new server. ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Michael Garretson: [email protected] Dave Heald [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: No longer online until our new server is brought online and the old messages are imported into the new server.
