Cecil,
ITE does require certification in Korea, and certified equipment must be
labeled with the MIC mark and some accompanying information about the
certification. But regulations do not mandate a location for the label or
marking. The label must be permanently affixed and easily seen. For a small
item that could easily be picked up it could be on the bottom, but for
larger or permanently installed equipment it should be visible when the
equipment's installed.
These same stipulations about label placement apply to telecommunications
equipment, as well.
Hope this helps.
Best regards,
-Fred Borda
Compliance International
www.typeapproval.com
At 11:06 AM 1/30/02 -0500, [email protected] wrote:
To All,
Does the Korean EMC requirements specify EMC any marking on the
product dataplate or label?
Cecil
-------------------------------------------
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.
Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/
To cancel your subscription, send mail to:
[email protected]
with the single line:
unsubscribe emc-pstc
For help, send mail to the list administrators:
Michael Garretson: [email protected]
Dave Heald [email protected]
For policy questions, send mail to:
Richard Nute: [email protected]
Jim Bacher: [email protected]
All emc-pstc postings are archived and searchable on the web at:
No longer online until our new server is brought online and the old
messages are imported into the new server.
----
Fred Borda
Director
Marketing & Business Development
Compliance International
www.typeapproval.com
------------------------------------------------------------------------
The experts in telecommunications equipment type approval
across the Asia-Pacific region
------------------------------------------------------------------------
4713 First Street, Suite 280
Pleasanton, California 94566-7362 USA
Tel +1.925.417.5571 (direct)
Fax +1.925.417.5574
Mobile +1.650.740.5762
[email protected]
-------------------------------------------
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.
Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/
To cancel your subscription, send mail to:
[email protected]
with the single line:
unsubscribe emc-pstc
For help, send mail to the list administrators:
Michael Garretson: [email protected]
Dave Heald [email protected]
For policy questions, send mail to:
Richard Nute: [email protected]
Jim Bacher: [email protected]
All emc-pstc postings are archived and searchable on the web at:
No longer online until our new server is brought online and the old messages
are imported into the new server.
