Hi again,
I think I expressed myself not that clear enough when asking the question?
so a bit more clear now:
The noise is injected on the AC mains port of mains powered (commercially
sold) equipment by a bulk current injection method.
What standard describe such a testmethod.
Kris
From: "Price, Ed" <[email protected]>
Reply-To: "Price, Ed" <[email protected]>
To: "'EMC-PSTC'" <[email protected]>
Subject: RE: noise immunity on mains powered equipment
Date: Thu, 24 Jan 2002 11:27:05 -0800
I can add that there is a Ford vehicular EMC specification, document
ES-XW7T-1A278-AB, that includes a Method RI-112 bulk current immunity test.
(I can send you a pdf on request.)
Regards,
Ed
Ed Price
[email protected]
Electromagnetic Compatibility Lab
Cubic Defense Systems
San Diego, CA USA
858-505-2780 (Voice)
858-505-1583 (Fax)
Military & Avionics EMC Services Is Our Specialty
Shake-Bake-Shock - Metrology - Reliability Analysis
>-----Original Message-----
>From: Ken Javor [mailto:[email protected]]
>Sent: Thursday, January 24, 2002 8:49 AM
>To: [email protected]; 'EMC-PSTC'
>Subject: Re: noise immunity on mains powered equipment
>
>
>
>I was hoping someone would be able to answer this more
>authoritatively than
>I can, but if there have been any replies, I missed them. I
>am aware that
>the US FDA imposes a BCI type requirement like MIL-STD-461
>CS114. Of course
>that is for medical equipment. RTCA/DO-160 imposes a very similar BCI
>requirement on commercial avionics. SAE ARP 1972 included BCI
>testing but
>was just a recommended practice, I don't know of any entity
>that actually
>levied it as a requirement. The automotive world in this
>country at least
>has adopted BCI techniques as well. There were in-house specs
>(I recall
>seeing a GM spec) and a better version has been adopted as an
>SAE J-type
>requirement industry-wide. That's about all I can think of
>off the top of
>my head.
>
>----------
>>From: [email protected]
>>To: "'EMC-PSTC'" <[email protected]>
>>Subject: noise immunity on mains powered equipment
>>Date: Wed, Jan 23, 2002, 11:06 AM
>>
>
>>
>> Hello,
>>
>> Has any-one ever heard about a standard (non-military) that
>describes noise
>> immunity of mains powered equipment.
>> Testing seems to be done by the current bulk injection
>method. the standard
>> is not IEC 61000-4-6.
>> Regards,
>> Kris Carpentier
-------------------------------------------
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.
Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/
To cancel your subscription, send mail to:
[email protected]
with the single line:
unsubscribe emc-pstc
For help, send mail to the list administrators:
Michael Garretson: [email protected]
Dave Heald [email protected]
For policy questions, send mail to:
Richard Nute: [email protected]
Jim Bacher: [email protected]
All emc-pstc postings are archived and searchable on the web at:
No longer online until our new server is brought online and the old
messages are imported into the new server.
_________________________________________________________________
MSN Foto's is de eenvoudigste manier om je foto's te delen en af te drukken:
http://photos.msn.nl/Support/WorldWide.aspx
-------------------------------------------
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.
Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/
To cancel your subscription, send mail to:
[email protected]
with the single line:
unsubscribe emc-pstc
For help, send mail to the list administrators:
Michael Garretson: [email protected]
Dave Heald [email protected]
For policy questions, send mail to:
Richard Nute: [email protected]
Jim Bacher: [email protected]
All emc-pstc postings are archived and searchable on the web at:
No longer online until our new server is brought online and the old messages
are imported into the new server.
