There is a new company dealing with this and they provide similar equipment for a lower price try
Chase Systems Inc. 230 Route 206, bldg #2 Flanders, NJ 07836 Phone 973-252-6605 email [email protected] Tell them you got the address from me perhaps I get an better price than. There is also TDK http://www.tdkrfsolutions.com which provide SAR systems (Schmidt & partner and Aprel). An other source is Aprel in Canada www.aprel.com/ My favorite is Chase because of the price. Best Regards Lothar Schmidt Technical Manager EMC/Radio BQB CETECOM Inc. 411 Dixon Landing Road Milpitas, CA 95035 * +1 408 586 6214 * +1 408 586 6299 -----Original Message----- From: Jacob Schanker [mailto:[email protected]] Sent: Thursday, January 17, 2002 1:11 PM To: [email protected]; [email protected] Subject: Re: SAR Test Equipment Bob: This is not from personal experience, but from a two page ad in the IEEE Antennas & Propagation magazine for Dec 2001 that I was just reading: DASY4 Dosimetric Assessment System Schmid & Partner Engineering AG (Switzerland) www.semcad.com www.speag.com [email protected] It looks impressive (and expensive). Regards, Jack Jacob Z. Schanker, P.E. 65 Crandon Way Rochester, NY 14618 Phone: 585 442 3909 Fax: 585 442 2182 [email protected] ----- Original Message ----- From: <[email protected]> To: <[email protected]> Sent: Thursday, January 17, 2002 12:23 PM Subject: SAR Test Equipment | | We are looking into SAR testing. Anyone know of manufacturers of SAR test | equipment? | | Bob Heller | 3M Product Safety, 76-1-01 | St. Paul, MN 55107-1208 | Tel: 651- 778-6336 | Fax: 651-778-6252 | | | ------------------------------------------- | This message is from the IEEE EMC Society Product Safety | Technical Committee emc-pstc discussion list. | | Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ | | To cancel your subscription, send mail to: | [email protected] | with the single line: | unsubscribe emc-pstc | | For help, send mail to the list administrators: | Michael Garretson: [email protected] | Dave Heald [email protected] | | For policy questions, send mail to: | Richard Nute: [email protected] | Jim Bacher: [email protected] | | All emc-pstc postings are archived and searchable on the web at: | No longer online until our new server is brought online and the old messages are imported into the new server. | ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Michael Garretson: [email protected] Dave Heald [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: No longer online until our new server is brought online and the old messages are imported into the new server. ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Michael Garretson: [email protected] Dave Heald [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: No longer online until our new server is brought online and the old messages are imported into the new server.
