Brian, The CB Scheme is based on IEC standards, not EN standards (although in many cases they are identical with the exception of some national or group deviations). The engineer may be referring to the IEC equivalent to the 01 Nov 2001 EN version of 61010.
Just because IEC publishes a standard (or new revision/edition), it does not mean that it is automatically accepted by all countries participating in the CB scheme for a particular category. The participating countries have to publish in the "CB Bulletin" which version of a particular standard is acceptable in that country (as well as any deviations to the IEC standard). If no countries yet recognize a particular version of an IEC standard (per the CB bulletin), then the NCB's cannot issue an official CB Report/Certificate to that standard. This may be the situation in your case. Brian O'Connell wrote: > Good people of the PSTC > > The safety agency engineer, doing the CB report, says that he cannot use > EN61010-1:2001 because it is not yet "recognized". > > As the DOP = 01 Nov 2001, I do not understand. > > Can someone please educate me???? > > R/S, > Brian O'Connell > Taiyo Yuden (USA), Inc. > > ------------------------------------------- > This message is from the IEEE EMC Society Product Safety > Technical Committee emc-pstc discussion list. > > Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ > > To cancel your subscription, send mail to: > [email protected] > with the single line: > unsubscribe emc-pstc > > For help, send mail to the list administrators: > Michael Garretson: [email protected] > Dave Heald [email protected] > > For policy questions, send mail to: > Richard Nute: [email protected] > Jim Bacher: [email protected] > > All emc-pstc postings are archived and searchable on the web at: > No longer online until our new server is brought online and the old > messages are imported into the new server. -- Regards, Scott Lemon CASPIAN NETWORKS RTP, NC Ph:(919) 547-1078 Fx: (919) 547-1010 [email protected] www.caspiannetworks.com ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Michael Garretson: [email protected] Dave Heald [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: No longer online until our new server is brought online and the old messages are imported into the new server.
