Hi Folks
(and I have read some of the subsequent posts on this subject)

Surely, notification in the OJ is rather irrelevant to a CB certificate -
which is a cert to the basic IEC, not the EN, and is for worldwide use!
Therefore if the IEC CB has already adopted that underlying latest IEC
61010-1 standard as being acceptable as a basis for CB certs, then the
enginer should issue the CB certificate to the latter (not the EN version).

I do grant you that a CB certificate to a non-OJ notified standard might
cause you some problems within the EU - and the engineer in question should
probably point that out.

Or have I got something wrong somewhere? (I don't think so).

John Allen
Thales Defence Communications
Bracknell, UK
(for about the next 2-3 months until I am redundant!)

-----Original Message-----
From: Brian O'Connell [mailto:[email protected]]
Sent: 16 January 2002 16:19
To: [email protected]
Subject: date of publication relevance



Good people of the PSTC

The safety agency engineer, doing the CB report, says that he cannot use
EN61010-1:2001 because it is not yet "recognized".

As the DOP = 01 Nov 2001, I do not understand.

Can someone please educate me????

R/S,
Brian O'Connell
Taiyo Yuden (USA), Inc.


-------------------------------------------
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.

Visit our web site at:  http://www.ewh.ieee.org/soc/emcs/pstc/

To cancel your subscription, send mail to:
     [email protected]
with the single line:
     unsubscribe emc-pstc

For help, send mail to the list administrators:
     Michael Garretson:        [email protected]
     Dave Heald                [email protected]

For policy questions, send mail to:
     Richard Nute:           [email protected]
     Jim Bacher:             [email protected]

All emc-pstc postings are archived and searchable on the web at:
    No longer online until our new server is brought online and the old
messages are imported into the new server.

-------------------------------------------
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.

Visit our web site at:  http://www.ewh.ieee.org/soc/emcs/pstc/

To cancel your subscription, send mail to:
     [email protected]
with the single line:
     unsubscribe emc-pstc

For help, send mail to the list administrators:
     Michael Garretson:        [email protected]
     Dave Heald                [email protected]

For policy questions, send mail to:
     Richard Nute:           [email protected]
     Jim Bacher:             [email protected]

All emc-pstc postings are archived and searchable on the web at:
    No longer online until our new server is brought online and the old 
messages are imported into the new server.

Reply via email to