Chris: I hadn't been following the thread, so I apologize if this is duplicative.
A book that I picked up at the IEE headquarters in London a few years ago cover a lot of ground in the safety and explosive atmospheres areas. It is: Adams, J. Maxwell, "Electrical Safety - a guide to the causes and prevention of electrical hazards", The Institution of Electrical Engineers, IEE Power Series 19, London, 1994 (ISBN 0 85296 806 X) Regards, Jacob Z. Schanker, P.E. 65 Crandon Way Rochester, NY 14618 USA Tel: 585 442 3909 Fax: 585 442 2182 [email protected] ----- Original Message ----- From: "Chris Chileshe" <[email protected]> To: "'Emc-Pstc' (E-mail)" <[email protected]> Sent: Monday, November 18, 2002 7:29 AM Subject: RE: Books on Intrinsic safety and ATEX - thanx. > > Group, > > Thank you everyone for your replies and pointers. > As usual, your advice has been well informed and most useful. > > Best regards > > - Chris > > -----Original Message----- > From: Chris Chileshe [SMTP:[email protected]] > Sent: Thursday, November 14, 2002 1:00 PM > To: 'Emc-Pstc' (E-mail) > Subject: Books on Intrinsic safety and ATEX > > > Group, > > The last response to recommended reading on basic EMC was very > good. > > Are there some recommended texts on application of the intrinsic > safety standards, designing for I.S. and/or application of the > directive? > > Any thoughts/pointers welcome > > Best regards > > - Chris Chileshe > - Ultronics Ltd, UK > > > > ________________________________________________________________________ > This e-mail has been scanned for all viruses by Star Internet. The > service is powered by MessageLabs. For more information on a proactive > anti-virus service working around the clock, around the globe, visit: > http://www.star.net.uk > ________________________________________________________________________ > > ------------------------------------------- > This message is from the IEEE EMC Society Product Safety > Technical Committee emc-pstc discussion list. > > Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ > > To cancel your subscription, send mail to: > [email protected] > with the single line: > unsubscribe emc-pstc > > For help, send mail to the list administrators: > Ron Pickard: [email protected] > Dave Heald: [email protected] > > For policy questions, send mail to: > Richard Nute: [email protected] > Jim Bacher: [email protected] > > All emc-pstc postings are archived and searchable on the web at: > http://ieeepstc.mindcruiser.com/ > Click on "browse" and then "emc-pstc mailing list" > ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on "browse" and then "emc-pstc mailing list"
