All, Does anyone know of a sample waveform or general characteristics for worst case V&I on an ESD drain pin when a circuit pack is inserted into an equipment shelf? This is an odd question I know, but my management asked for the info and I really have no idea (and it "shouldn't" happen anyway ;o)
I guess even a typical maximum charge that can be expected to be on a circuit pack would be sufficient information. Thanks in advance! Dave Heald ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Dave Heald: davehe...@attbi.com For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on "browse" and then "emc-pstc mailing list"