I certainly agree that reinforced can be a solid insulation - hence the 0.4. mm thickness requirement. Sorry if my memo gave you a different impression.
Bill Bisenius [email protected] -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Peter L. Tarver Sent: Friday, October 25, 2002 4:41 PM To: [email protected] Subject: RE: Layered Reinforced Insulation Bill - This is not quite correct. Reinforced Insulation may also be a single piece of insulation (I do note you used "may"). There's no definition, per se, of multiple layers, except for the case of thin sheet material. Regards, Peter L. Tarver, PE Product Safety Manager Sanmina-SCI Homologation Services San Jose, CA [email protected] > From: Bill Bisenius > > A reinforced insulation system by definition may > be multiple layers if it is > all the same insulating material. ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on "browse" and then "emc-pstc mailing list" ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on "browse" and then "emc-pstc mailing list"
