All, Can anyone reference me to a calibration lab that can perform the following calibration?
I have been unsuccessful in finding a calibration facility that can perform measurements across the 26.5-40GHz frequency range. I'm trying to find a laboratory that can perform a calibration on an Amplifier Research DC7620 directional coupler across the 26.5-40GHz frequency range. I'm in the process of purchasing the necessary waveguide to coax adapters to attach to each end of the directional coupler. I'm searching for a laboratory that can fullfill one of the below requirements and I'm looking to have insertion loss data delivered with the calibration certificate. ANSI/NCSL-Z540-1 MIL-STD-45662A ISO 17025 Thanks in advance. Regards, Michael E. Hart Sr Systems Engineer E3 / EMC / EME / EMI / ESD Testing and Design Support Lockheed Martin Naval Electronics & Surveillance Systems PO Box 4840, EP5-D5, MD45 Syracuse, NY 13221 Email: [email protected] 315-456-3551 (Office) 315-456-3710 (EMI Lab) 315-467-0603 (Pager) 315-456-0509 (Fax) ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on "browse" and then "emc-pstc mailing list"
