Hi George, I haven't got a copy of EN55024, but if it is anything like the format of EN61000-6-2, then the info you are looking for will appear as 'notes' under immunity testing of dc input and output ports will read ...
"[EFTs & Surge] Not applicable to input ports intended for connection to a battery or a rechargeable battery which must be removed or disconnected from the apparatus for recharging. Apparatus with a d.c. power input port intended for use with an ac-dc power adaptor shall be tested on the a.c. power input of the ac-dc power adaptor specified by the manufacturer or, where none is specified, using a typical ac-dc power adaptor. The test is not applicable to d.c. power input ports intended to be permanently connected to cables less than 10m in length " This excerpt from BS EN 61000-6-2:1999 Table 3, Note 3. Not sure if EN55024 has similar statement. Regards - Chris Chileshe - Ultronics Ltd -----Original Message----- From: George Stults [SMTP:george.stu...@watchguard.com] Sent: Thursday, October 10, 2002 9:13 PM To: 'emc-p...@ieee.org' Subject: requirement for surge and EFT Hello Group, I am talking with an offshore manufacturer who is suggesting that their CE marked ITE gear does not have to pass Surge and EFT since it runs off 12Vdc, normally provided by an AC/DC power supply, which is supplied in the same package. They suggest that the AC/DC power supply, but not the ITE, has to pass Surge, etc. I'm sure that the whole system has to pass, but I don't know chapter and verse to quote. I suppose the scope should be spelled out in EN55024 but I don't have a copy of it, yet. Thanks in advance. George Stults ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Dave Heald: davehe...@attbi.com For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on "browse" and then "emc-pstc mailing list" ________________________________________________________________________ This e-mail has been scanned for all viruses by Star Internet. The service is powered by MessageLabs. For more information on a proactive anti-virus service working around the clock, around the globe, visit: http://www.star.net.uk ________________________________________________________________________ ________________________________________________________________________ This e-mail has been scanned for all viruses by Star Internet. The service is powered by MessageLabs. For more information on a proactive anti-virus service working around the clock, around the globe, visit: http://www.star.net.uk ________________________________________________________________________ ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Dave Heald: davehe...@attbi.com For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on "browse" and then "emc-pstc mailing list"