Situation: 0.5 inch (13mm) diameter hole punched in a metal chassis through which is passed a fiber-optic connector. Once the connector has been passed thru the hole, you're left with the small diameter cable dangling in a gaping 1/2 inch hole. High noise environment inside the product needs to be contained.
Now the cable is of course non-conductive, but is there some emi grommet for the gaping hole in such a construction that plugs up a large diameter hole while at the same time allowing for a small thru-hole? Regards, Doug McKean ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on "browse" and then "emc-pstc mailing list"
