I read in !emc-pstc that Richard Steele <[email protected]> wrote (in <[email protected]>) about 'Creepage' on Wed, 9 Oct 2002: >Whilst were on the subject of creepage, can anyone shed any light why there >are >creepage distances for Printed Wiring Material shown in Table 4 of IEC 664-1 >1992 but these are not included in EN 60950 2000 table 2L.
IEC/EN 60950:2000 is probably aligned with IEC 60664-1:2000. -- Regards, John Woodgate, OOO - Own Opinions Only. http://www.jmwa.demon.co.uk Interested in professional sound reinforcement and distribution? Then go to http://www.isce.org.uk PLEASE do NOT copy news posts to me by E-MAIL! ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on "browse" and then "emc-pstc mailing list"
