Hi John,
A lot will depend on specifics of the equipment.
The MII Network Access License for switching equipment could take as long
as 6 months, depending on testing MII requires. The process will also
include review of the equipment by an expert panel convened by MII and
possibly network trial testing. You'll need to have someone on the ground
in China to support the process.
As for the CCC mark administered by CNCA, switching equipment should not
require it. Again, depends on products specifics, though.
If you'd like to go over product specifics to narrow down the requirements,
by all means contact me any time off-list.
Hope this helps.
-Fred Borda
Compliance International
www.typeapproval.com
At AM 08:27 09/30/02 -0700, John Smith wrote:
I am new to the group.
I am consulting with a company that is making a CO
switch. They are planning to market the product in
China. As I understand the process, I have to get MII
and CNCA approvals. Is there anything else that I need
to do for China?
About how long does it take to get these approvals?
Thank You,
J. Smith
=====
Best Regards,
John Smith
Regulatory Consulting
__________________________________________________
Do you Yahoo!?
New DSL Internet Access from SBC & Yahoo!
http://sbc.yahoo.com
-------------------------------------------
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.
Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/
To cancel your subscription, send mail to:
[email protected]
with the single line:
unsubscribe emc-pstc
For help, send mail to the list administrators:
Ron Pickard: [email protected]
Dave Heald: [email protected]
For policy questions, send mail to:
Richard Nute: [email protected]
Jim Bacher: [email protected]
All emc-pstc postings are archived and searchable on the web at:
http://ieeepstc.mindcruiser.com/
Click on "browse" and then "emc-pstc mailing list"
----
Fred Borda
Director
Marketing & Business Development
Compliance International
www.typeapproval.com
--------------------------------------------------
The experts in telecommunications equipment type approval
across the Asia-Pacific region
--------------------------------------------------
4713 First Street, Suite 280
Pleasanton, California 94566-7362 USA
Tel +1.925.417.5571 (direct)
Fax +1.925.417.5574
Mobile +1.650.740.5762
[email protected]
-------------------------------------------
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.
Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/
To cancel your subscription, send mail to:
[email protected]
with the single line:
unsubscribe emc-pstc
For help, send mail to the list administrators:
Ron Pickard: [email protected]
Dave Heald: [email protected]
For policy questions, send mail to:
Richard Nute: [email protected]
Jim Bacher: [email protected]
All emc-pstc postings are archived and searchable on the web at:
http://ieeepstc.mindcruiser.com/
Click on "browse" and then "emc-pstc mailing list"
