On Tue, 3 Sep 2002 15:49:43 -0700 (PDT), Rich Nute <[email protected]> wrote:
> If you use a PTC, then your output need not necessarily be > considered "inherently limited." In this case, your > maximum output current is 100 amps and your maximum VA is > 250, i.e., 25 amps (with the PTC shorted). The trick is > to determine if your test houses can class the PTC as an > "overcurrent protective device." Is it permitted to use PTC as an overcurrent protective device for power sources not inherently limited? I don't have EN60950-1 here, but I remember it must be a fuse or other non-autoreset device. Regards, Tom -------------------------------------------------- Tomonori Sato <[email protected]> URL: http://member.nifty.ne.jp/tsato/ ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on "browse" and then "emc-pstc mailing list"
