I read in !emc-pstc that [email protected] wrote (in <11c.164cd2d4.2aa2 [email protected]>) about 'Telephone Headset' on Sat, 31 Aug 2002:
>I would disagree on this one. A telephone is covered under EN 60950, >therefore the logical place for a telephone accessory would be the same >standard. Is a headset more like a telephone or more like a pair of headphones with a boom mic attached? > >Actually, this points out the need for the number of technical standards to >be minimized. As time goes on, the standards need to be integrated. It's >becoming harder and harder to tell audio/video equipment from ITE. There is >less and less justification for maintaining two sets of standards. Just my >opinion. IEC TC108 is currently engaged in combining IEC 60065 and IEC 60950 into one unified standard. You are allowed to hold your breath, but figure on holding it for ten years, at the current estimate. -- Regards, John Woodgate, OOO - Own Opinions Only. http://www.jmwa.demon.co.uk Interested in professional sound reinforcement and distribution? Then go to http://www.isce.org.uk PLEASE do NOT copy news posts to me by E-MAIL! ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on "browse" and then "emc-pstc mailing list"
