We have some telephone headsets that we want to CE Mark, but are not sure what safety standard to use. Additionally, I don't see any category under the CE Marking directive that would be entirely applicable. The LVD seems most logical, except that the input voltage to the headsets is well below the 75DC, 50AC cutoff. The headsets will connect to an OEM audio amplifier that has been evaluated to the LVD, and seems to contain all the necessary isolation (we are not even selling the amplifier). The primary reason for wanting to CE Mark is because a competitor is doing it.
Is there a safety standard that we should use that is specific to these telephone headsets for EU compliance? Thanks, Chris K. Poore Staff Compliance Engineer --------------------------------- Percept Technology Labs, Inc. 4735 Walnut #E Boulder, CO 80301 303-444-7480 ext. 113 303-444-1565 Fax mailto:[email protected] http://www.percept.com ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on "browse" and then "emc-pstc mailing list"
