Hi Dave,
Test Db variant 1 test cycle has a period of 24 hours.
Regards,
Kurt
David Heald wrote:
Greetings all,
Does anyone know the time length of the condensation cycles in IEC
60068-2-30 (EN 300 019 states that the condensation test lasts 2 cycles and
references 60068-2-30 as the test method).
Thanks in advance!
Dave Heald
-------------------------------------------
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.
Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/
To cancel your subscription, send mail to:
[email protected]
with the single line:
unsubscribe emc-pstc
For help, send mail to the list administrators:
Ron Pickard: [email protected]
Dave Heald: [email protected]
For policy questions, send mail to:
Richard Nute: [email protected]
Jim Bacher: [email protected]
All emc-pstc postings are archived and searchable on the web at:
http://ieeepstc.mindcruiser.com/
Click on "browse" and then "emc-pstc mailing list"
--
Kurt M. Marden
Environmental Simulation Lab Manager
Curtis-Straus LLC [email protected]
Laboratory for EMC,Safety Environmental Simulation Lab
NEBS,SEMI-S2 and Telecom 168 Ayer Rd.
527 Great Road Littleton, MA 01460
Littleton, MA 01460 voice (978) 486-8880
http://www.curtis-straus.com fax (978) 486-0806
-------------------------------------------
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.
Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/
To cancel your subscription, send mail to:
[email protected]
with the single line:
unsubscribe emc-pstc
For help, send mail to the list administrators:
Ron Pickard: [email protected]
Dave Heald: [email protected]
For policy questions, send mail to:
Richard Nute: [email protected]
Jim Bacher: [email protected]
All emc-pstc postings are archived and searchable on the web at:
http://ieeepstc.mindcruiser.com/
Click on "browse" and then "emc-pstc mailing list"
