Dan, I saw something from Ergonomics Inc. today while in the office. Also, try ED&D Inc. who may be able to help you out. You may contact their website through safetylink.com or search in Google.
Best Regards, Peter Merguerian -----Original Message----- From: Anchondo, Dan To: '[email protected]' Sent: 8/21/02 11:37 PM Subject: GR-63-CORE NEBS Needle Flame Test All I am looking for a needle flame test set up equal to the test set up in GR-63. Can anyone point me to a supplier of this type of test gear? Dan Anchondo Associate Compliance Engineer CIENA Corporation 10480 Ridgeview Court Cupertino, CA. 95014 Main (408) 366-4700 Direct (408) 366-4942 FAX (408) 366-4866 ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on "browse" and then "emc-pstc mailing list" ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on "browse" and then "emc-pstc mailing list"
