Calculate the impedance of 50 uH shunted by 50 Ohms, or just read it off the graph, you're allowed 20% slop, aren't you?
on 3/26/02 1:58 PM, Thomas Donnelly at [email protected] wrote: > > Does anyone have a graph of the ANSI C63.4-2000 LISN impedance > characteristic curve that has a reasonable degree of resolution, or perhaps > a tabular listing of the values. I am attempting to read the values off the > graph presented in the standard and do not believe I can get a reasonably > accurate value. > > Thanks, > Tom Donnelly > Lucent Technologies > [email protected] > > > ------------------------------------------- > This message is from the IEEE EMC Society Product Safety > Technical Committee emc-pstc discussion list. > > Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ > > To cancel your subscription, send mail to: > [email protected] > with the single line: > unsubscribe emc-pstc > > For help, send mail to the list administrators: > Ron Pickard: [email protected] > Dave Heald: [email protected] > > For policy questions, send mail to: > Richard Nute: [email protected] > Jim Bacher: [email protected] > > All emc-pstc postings are archived and searchable on the web at: > http://ieeepstc.mindcruiser.com/ > Click on "browse" and then "emc-pstc mailing list" > -- Ken Javor EMC Compliance Huntsville, Alabama 256/650-5261 ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on "browse" and then "emc-pstc mailing list"
