I found the following areas of change that affects our equipment (no TNV). Other sections may have also changed.
1.3.6: equipment orientation clarified 1.5.6: requirements for X1 an X2 caps has changed and Y cap standard added 1.7.1: location of power rating marking revised 2.4.2: limited current circuit capacitance value depends upon voltage Table 2G (pg 83): examples of insulation applications expanded and clarified 2.10.3.1: Annex G provides alternate method for determining clearances 4.2.10: wall and ceiling mounted equipment load test 4.3.8: batteries 4.6.4: openings in transportable equipment 4.7.1: the two methods of reducing risk of fire is clarified - method 2 now says a fire enclosure is not required 4.7.2: cond > > Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ > > To cancel your subscription, send mail to: > majord...@ieee.org > with the single line: > unsubscribe emc-pstc > > For help, send mail to the list administrators: > Ron Pickard: emc-p...@hypercom.com > Dave Heald: davehe...@mediaone.net > > For policy questions, send mail to: > Richard Nute: ri...@ieee.org > Jim Bacher: j.bac...@ieee.org > > All emc-pstc postings are archived and searchable on the web at: > http://ieeepstc.mindcruiser.com/ > Click on "browse" and then "emc-pstc mailing list" ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Dave Heald: davehe...@mediaone.net For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on "browse" and then "emc-pstc mailing list"
