Please note that the following are personal comments and not those of my
employer.
I am looking for information both on the environments (assume aircraft)
that justify the following levels and the methods for testing. I have been
asked to find EMI labs that can test to the following:
900MHz - 1GHz 1100 V/m peak 1kHz pulse
modulation, 90% depth with a 1% duty cycle; in addition signal will be
switched on/off
at a 1Hz rate (on 200ms; off
800ms)
Thanks in advance,
Susan H. Beard
EMC Consultant
-------------------------------------------
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.
Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/
To cancel your subscription, send mail to:
[email protected]
with the single line:
unsubscribe emc-pstc
For help, send mail to the list administrators:
Ron Pickard: [email protected]
Dave Heald: [email protected]
For policy questions, send mail to:
Richard Nute: [email protected]
Jim Bacher: [email protected]
All emc-pstc postings are archived and searchable on the web at:
http://ieeepstc.mindcruiser.com/
Click on "browse" and then "emc-pstc mailing list"
