Hello All, So far we have only tested our products to Part 68 and have not, until now, been requested to connect prototype telecom devices to the network. Is there a process that the FCC has for such prototypes for a limited amount of time and small number of units (less than 10), before the device is fully certified? The prototype model has either been certified by an earlier older model but is now being upgraded or the prototypes have not been certified yet, but require some field trials at a customer site for evaluation.
Thanks in-advance. Richard Georgerian Compliance Engineer Carrier Access Corporation 5395 Pearl Parkway Boulder, CO 80301 USA Tele: 303-218-5748 Fax: 303-218-5503 mailto:[email protected] ************************************************************************* This e-mail transmission, and any documents, files, or previous e-mail messages attached to it may contain information that is confidential or legally privileged. If you are not the intended recipient, or a person responsible for delivering it to the intended recipient, you are hereby notified that you must not read this transmission and that any disclosure, copying, printing, distribution, or use of any of the information contained in or attached to this transmission is strictly prohibited. If you have received this transmission in error, please immediately notify the sender by telephone or return e-mail and delete the original transmission and its attachments without reading or saving them in any manner. Thank you. *************************************************************************
