Hi Bob, Lucky for you Anatel's site is now in English. http://www.anatel.gov.br/english_site/default.asp
My experience with 900 and 2.4 equipment is that Brazil requires this type equipment to be "registered" not type approved. The registration is based either on an FCC or ETSI test report. Process is fairly simple but you may need some in country representation. Kind Regards, Sam Wismer Engineering Manager ACS, Inc. Phone: (770) 831-8048 Fax: (770) 831-8598 Web: www.acstestlab.com -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of [email protected] Sent: Wednesday, March 06, 2002 12:33 PM To: [email protected] Subject: RFID Device Can anyone help me get information on what Brazilian standards might apply the following product? * RFID product (radio frequency identification device) * 900 MHz * 700 milliwatts * Used to check inventory and product locations in a warehouse by radio frequency. I have checked the "www.anatel.gov.br" website and I have obtained some information but not enough to feel confident about what might apply. Thanks in advance. Best regards, Bob Heller 3M Product Safety, 76-1-01 St. Paul, MN 55107-1208 Tel: 651- 778-6336 Fax: 651-778-6252 ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on "browse" and then "emc-pstc mailing list" ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on "browse" and then "emc-pstc mailing list"
