Use caution with this approach. IEC 60825-2 is specifically for Optical Fiber Communications Systems (OFCS) and requires the consideration of fiber breaks exposing humans to the laser energy contained within. 60825-2 is referenced in 60825-1 and must be considered for OFCS. Additionally, you need to consider where the fiber goes as a break might occur downstream and expose not only direct users of the equipment.

Jon Curtis
Curtis-Straus LLC

Doug Mckean wrote:

Do the acid test type question ... During normal use, what are you exposing the end user to? For instance, with a laser pointer using a Class IIIb laser that emits unprotected from the pointer, the pointer is Class IIIb. If instead, you are using a Class IIIb laser for fiber optic communication and the entire beam is contained within the fiber, no lasing is emitted from the product during normal operation and/or service or maintainance, then you *could* declare the telco product as Class I. - Doug McKean


-------------------------------------------
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.

Visit our web site at:  http://www.ewh.ieee.org/soc/emcs/pstc/

To cancel your subscription, send mail to:
    majord...@ieee.org
with the single line:
    unsubscribe emc-pstc

For help, send mail to the list administrators:
    Ron Pickard:              emc-p...@hypercom.com
    Dave Heald:               davehe...@mediaone.net

For policy questions, send mail to:
    Richard Nute:           ri...@ieee.org
    Jim Bacher:             j.bac...@ieee.org

All emc-pstc postings are archived and searchable on the web at:
   http://ieeepstc.mindcruiser.com/
   Click on "browse" and then "emc-pstc mailing list"



--
Jon D. Curtis, P.E.

Director of Engineering
Curtis-Straus LLC NRTL TCB

One Stop Laboratory for NEBS, EMC, Product Safety, and Telecom Testing.
527 Great Road
Littleton, MA 01460 USA
Voice 978-486-8880  Fax 978-486-8828
email: jcur...@curtis-straus.com
WWW.CURTIS-STRAUS.COM




-------------------------------------------
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.

Visit our web site at:  http://www.ewh.ieee.org/soc/emcs/pstc/

To cancel your subscription, send mail to:
    majord...@ieee.org
with the single line:
    unsubscribe emc-pstc

For help, send mail to the list administrators:
    Ron Pickard:              emc-p...@hypercom.com
    Dave Heald:               davehe...@mediaone.net

For policy questions, send mail to:
    Richard Nute:           ri...@ieee.org
    Jim Bacher:             j.bac...@ieee.org

All emc-pstc postings are archived and searchable on the web at:
   http://ieeepstc.mindcruiser.com/
   Click on "browse" and then "emc-pstc mailing list"

Reply via email to