I read in !emc-pstc that Brian O'Connell <[email protected]> wrote (in <[email protected]>) about '60950 SFC', on Fri, 22 Feb 2002: >My notes from an agency (60950) seminar state that fault conditions shall be >done with 16A installation fuses. I cannot find any clause in EN60950:2000 >or UL60950, 3d Ed with this requirement. > >Is this test requirement in one the stds listed in 60950, or am I blind?
It is certainly inappropriate for UK. We have fused plugtops, 3 A, 5A, 10 A and 13 A, and ring circuits fused at 30 A or with MCBs at 32 A. -- Regards, John Woodgate, OOO - Own Opinions Only. http://www.jmwa.demon.co.uk Interested in professional sound reinforcement and distribution? Then go to http://www.isce.org.uk PLEASE do NOT copy news posts to me by E-MAIL! ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on "browse" and then "emc-pstc mailing list"
