Joachim: I believe you're right on! MOVs degrade with repeated hits. Perhaps the answer is the silicon TVS products from ON Semi and others.
Chuck [email protected] wrote: > Greetings, > > To meet immunity requirements I will get a line filter which will include > three line-ground MOV's, (275V). > To my opinion this may be a safety issue due to the danger to increase the > leakage current especially after an overload of the MOV's. > > Am I in the right or is this not an issue regarding the Low Voltage > Directive? > > Joachim Lohr > ASTeX GmbH > Tel.: ++49 30 464 003 19 > [email protected] > > ------------------------------------------- > This message is from the IEEE EMC Society Product Safety > Technical Committee emc-pstc discussion list. > > Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ > > To cancel your subscription, send mail to: > [email protected] > with the single line: > unsubscribe emc-pstc > > For help, send mail to the list administrators: > Ron Pickard: [email protected] > Dave Heald: [email protected] > > For policy questions, send mail to: > Richard Nute: [email protected] > Jim Bacher: [email protected] > > All emc-pstc postings are archived and searchable on the web at: > http://ieeepstc.mindcruiser.com/ > Click on "browse" and then "emc-pstc mailing list" ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on "browse" and then "emc-pstc mailing list"
