Hello,

They are usually called PLC/PLT Power Line Carrier systems. On the ones I
have seen conducted emissions are exempt in the US, carrier current system,
and the radiated is usually done at several typical locations (houses). All
the manufacturers I have talked to would like to be able to do measurements
on a OATs but have not successfully convinced the FCC that it is possible. I
have not seen any that meet the CISPR22 conducted emissions limits but they
are getting into Europe by way of a TCF. 

The interference caused by PLC is a HOT topic in Europe - Next week I will
attend a CENELEC/ETSI standards meeting where they are coming up with
in-situ limits for installations.


Regards,

Ken 


 


From: Hans Mellberg [mailto:[email protected]]
Sent: Wednesday, January 29, 2003 3:27 PM
To: [email protected]
Subject: power-line LAN


What are the unique testing requirements for a power-line based LAN (i.e.
the
information is transported on the powerlines within a home as an example)
for CE
mark? Would the power line harmonics be an issue? ANy unique set-up besides
a couple
of devices exchanging info?

Hans Mellberg

__________________________________________________
Do you Yahoo!?
Yahoo! Mail Plus - Powerful. Affordable. Sign up now.
http://mailplus.yahoo.com


This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.

Visit our web site at:  http://www.ewh.ieee.org/soc/emcs/pstc/

To cancel your subscription, send mail to:
     [email protected]
with the single line:
     unsubscribe emc-pstc

For help, send mail to the list administrators:
     Ron Pickard:              [email protected]
     Dave Heald:               [email protected]

For policy questions, send mail to:
     Richard Nute:           [email protected]
     Jim Bacher:             [email protected]

Archive is being moved, we will announce when it is back on-line.
All emc-pstc postings are archived and searchable on the web at:
    http://www.ieeecommunities.org/emc-pstc


This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.

Visit our web site at:  http://www.ewh.ieee.org/soc/emcs/pstc/

To cancel your subscription, send mail to:
     [email protected]
with the single line:
     unsubscribe emc-pstc

For help, send mail to the list administrators:
     Ron Pickard:              [email protected]
     Dave Heald:               [email protected]

For policy questions, send mail to:
     Richard Nute:           [email protected]
     Jim Bacher:             [email protected]

Archive is being moved, we will announce when it is back on-line.
All emc-pstc postings are archived and searchable on the web at:
    http://www.ieeecommunities.org/emc-pstc

Reply via email to