I don't have a copy of EN55022 to look at so I'll ask a question: How many
ferrite clamps and what type are specified? And are they placed at various
places, at one location only, or placed as with a Bicon balun?
Dave Cuthbert
Micron Technology
From: [email protected] [mailto:[email protected]]
Sent: Tuesday, January 28, 2003 11:30 AM
To: [email protected]
Subject: EN55022:1998 + A1:2000
A1 to EN55022:1998 requires the use of ferrite clamps on all cables leaving
the table-top EUT for a connection outside the test site. Are there any
other manufacturers of these clamps other than Fischer Custom
Communications?
Richard Woods
Sensormatic Electronics
Tyco International
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.
Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/
To cancel your subscription, send mail to:
[email protected]
with the single line:
unsubscribe emc-pstc
For help, send mail to the list administrators:
Ron Pickard: [email protected]
Dave Heald: [email protected]
For policy questions, send mail to:
Richard Nute: [email protected]
Jim Bacher: [email protected]
All emc-pstc postings are archived and searchable on the web at:
http://ieeepstc.mindcruiser.com/
Click on "browse" and then "emc-pstc mailing list"
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.
Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/
To cancel your subscription, send mail to:
[email protected]
with the single line:
unsubscribe emc-pstc
For help, send mail to the list administrators:
Ron Pickard: [email protected]
Dave Heald: [email protected]
For policy questions, send mail to:
Richard Nute: [email protected]
Jim Bacher: [email protected]
All emc-pstc postings are archived and searchable on the web at:
http://ieeepstc.mindcruiser.com/
Click on "browse" and then "emc-pstc mailing list"
