Dear Group,
The OJ for the LVD (page C317/73) gives 1.1.2004 as being the date beyond
which IEC 61010-1:1990/A2:1995 can no longer be used to presume
conformance with the requirements of this Directive. After this date, can
equipment previously assessed to this standard still be marketed without
reassessment to the new standard (IEC 61010-1:2001)? If so, until when?
Between 1.4.2001 (the 'dow' of IEC 61010-1:1990+A1:1992 (Modified)) and
1.1.2004 (the dow of IEC 61010-1:1990/A2:1995), can either IEC
61010-1:1990/A2:1995 or IEC 61010-1:2001 be used to presume conformance
with the requirements of LVD?
Apologies if the answers to the above have been covered before and are
thus locked up in the group's archives.
Ian Unwin
Servomex Group Limited
________________________________________________________________________
This email has been scanned for all viruses by the MessageLabs SkyScan
service.
This electronic message contains information from Servomex which may be
privileged or confidential.
The information is intended to be for the use of the individual(s) or entity
named above.
If you are not the intended recipient be aware that any disclosure, copying,
distribution or use of the contents of this information is prohibited.
If you have received this electronic message in error, please notify us
immediately.
Activity and use of the Servomex E-mail system is monitored to secure its
effective operation and for other lawful business purposes. Communications
using this system may also be monitored and may be
recorded to secure effective operation and for other lawful business
purposes.
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.
Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/
To cancel your subscription, send mail to:
[email protected]
with the single line:
unsubscribe emc-pstc
For help, send mail to the list administrators:
Ron Pickard: [email protected]
Dave Heald: [email protected]
For policy questions, send mail to:
Richard Nute: [email protected]
Jim Bacher: [email protected]
All emc-pstc postings are archived and searchable on the web at:
http://ieeepstc.mindcruiser.com/
Click on "browse" and then "emc-pstc mailing list"
