Zohar, You need to comply with US Code For Regulations 21CFR1040 The Center for Devices and Radiological Health, an arm of the US Food and Drug Administration (FDA) regulates this area.
Here's a link that is useful. http://www.fda.gov/cdrh/comp/rad_consumer.html John A. Juhasz GE Interlogix Fiber Options Div. Bohemia, NY From: [email protected] [mailto:[email protected]] Sent: Tuesday, January 21, 2003 4:47 AM To: [email protected] Subject: Fiber optic hazards level 3B US & EU requirements Hello, I have an ITE product consisting of fiber optic Transceiver 200mW output power. I'm not familiar with that type of equipment, but I know that the fiber optic should comply with IEC 60825-2. What are the requirements for US. Any information regarding the above subject is appreciated. This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on "browse" and then "emc-pstc mailing list" This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on "browse" and then "emc-pstc mailing list"
