The FDA does not consider LEDs to be lasers in the USA, so the are not controlled by FDA regulations. So go ahead a burn out someone's eye - lol.
Richard Woods Sensormatic Electronics Tyco International From: [email protected] [mailto:[email protected]] Sent: Tuesday, January 21, 2003 4:47 AM To: [email protected] Subject: Fiber optic hazards level 3B US & EU requirements Hello, I have an ITE product consisting of fiber optic Transceiver 200mW output power. I'm not familiar with that type of equipment, but I know that the fiber optic should comply with IEC 60825-2. What are the requirements for US. Any information regarding the above subject is appreciated. This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on "browse" and then "emc-pstc mailing list" This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on "browse" and then "emc-pstc mailing list"
