Hello Doug, Check out the following standard:
IEC Publication 60173, Colors of the cores of flexible cables and cords. The color scheme you are looking for is referenced in this standard. Best regards, Ron Wellman At 03:53 PM 1/20/2003 -0700, POWELL, DOUG wrote: >Hello group, > >In the past I understood the color requirements of green/yellow wire to be >nominally 50%/50% coverage with a tolerance minimum of 30% coverage for >either green or yellow with the remainder to be the other color. I've see >reference to HD 186 Table 1, but I am not certain this is where the >requirement is outlined in detail. I would like to know that I am >purchasing the correct document. > >Is there anyone who can tell me which CENELEC (or VDE, etc) document >details this requirement? > >Thanks, -doug > >Douglas E. Powell >Regulatory Compliance Engineer >Advanced Energy Industries, Inc. >Fort Collins, CO 80535 USA > ><mailto:[email protected]>mailto:[email protected] > >_______________________________________________________________ >This message, including any attachments, may contain information >that is confidential and proprietary information of Advanced >Energy Industries, Inc. The dissemination, distribution, use >or copying of this message or any of its attachments is >strictly prohibited without the express written consent of >Advanced Energy Industries, Inc. This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on "browse" and then "emc-pstc mailing list"
