I read in !emc-pstc that Sam Wismer <swis...@acstestlab.com> wrote (in <001001c2b8c4$7df00d20$0b01000a@sam>) about 'IEC vs. EN' on Fri, 10 Jan 2003: > Case in point: EN 61000-4-4 Amd. 2 DoW for the superseded standard is 7/04 > however EN55024 calls out IEC 61000-4-4.
No, it only appears to. Because it's a clone of CISPR 24, its Normative References clause refers to IEC standards. But Annex ZA (not very clearly) replaces those references by the corresponding EN. > Is IEC 61000-4-4 amd. 2 in force > now and should it be used now when EN55024 is the applied standard? > No. The EN transition period applies. Industry cannot work with standards that come into effect instantaneously and without prior notice. -- Regards, John Woodgate, OOO - Own Opinions Only. http://www.jmwa.demon.co.uk Interested in professional sound reinforcement and distribution? Then go to http://www.isce.org.uk PLEASE do NOT copy news posts to me by E-MAIL! This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Dave Heald: davehe...@attbi.com For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on "browse" and then "emc-pstc mailing list"