IEEE Meeting January 16, 2003 at 6:30 pm
"Two Layer PCB EMC Design Techniques". The presentation will cover various design techniques that will assist in designing a two layer PCB to meet EMC requirements. These techniques are used in various products with processors up to 500MHz and 100MHz data buses. The general topics will cover how to manage the spectrum of the sources, logic design problems that cause excessive emissions, component placement and layout techniques. Presentation by: Dr. Keith B. Hardin Dr. Keith B. Hardin received a Bachelor of Science in 1981 and Masters of Engineering in 1982 from the University of Louisville specializing in Electrical Engineering. He joined IBM in the typewriter and printer development teams which designed and developed a number of products. In 1989, Dr. Hardin was selected to participate in the IBM Resident Study Program, which provided full support for him to pursue a Ph.D. degree in Electrical Engineering, specializing in ElectroMagnetic Compatibility (EMC) at the University of Kentucky under Dr. Clayton Paul. The degree was completed in 1991 and he returned to Lexmark International, a spin off of IBM, as an engineer in the EMC department. Dr. Hardin is a NARTE certified EMC engineer and a registered Professional Engineer in the state of Kentucky. Dr. Hardin is now a Senior Technical Staff Member in the EMC Technology Group at Lexmark. His primary job function is to consult with internal and external customers for EMC compliance and performs research to advance Lexmark's understanding of EMC phenomena. His interests are in reducing emissions of information technology equipment and attaining EMC compliance with minimal cost. He is a co-inventor of Spread Spectrum Clock Generation which is use in millions of products every year. Location: CKC Laboratories in Brea Located in Small Shopping Center 110 North Olinda Place Brea, CA 92823 714-337-1133 Office: 714-993-6112 When: January 16, 2003 6:30pm Dinner Served Presentation 7:00pm to 8:00pm Cost: MEETINGS ARE NOW FREE AND OPEN TO ANYONE!!!! Reservations requested by 5:00 p.m. January 13. Please e-mail or call. Robert Tozier at 714-337-1133 or [email protected] This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on "browse" and then "emc-pstc mailing list"
