Nick
Try the GOST Stds Search Engine on
http://www.gost.ru/sls/gost.nsf/PVP/1762244D53B86C4AC32566DE0038560E?OpenDoc
ument&ALT
Regards
John Allen
Technical Consultant
Safety and Risk Management
ERA Technology Ltd
Cleeve Rd
Leatherhead
Surrey KT22 7SA
Tel: +44 (0) 1372-367025 (Direct)
+44 (0) 1372-367000 (Switchboard)
Fax: +44 (0) 1372-367102 (Fax)
From: Nick Williams [mailto:[email protected]]
Sent: 24 February 2003 10:31
To: [email protected]
Subject: GOST standards
I've been asked to look at a piece of equipment which is made in
Russia and which has numerous certifications to various GOST
standards.
Is there anywhere I can identify some sort of cross reference between
the GOST standard numbers and the EN standards (if indeed such a
comparison is valid)?
In the absence of a more specific standard we've decided to apply the
requirements for ITE, so equivalence to EN 60950 is the most
important issue.
Any help gratefully received.
Regards
Nick.
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.
Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/
To cancel your subscription, send mail to:
[email protected]
with the single line:
unsubscribe emc-pstc
For help, send mail to the list administrators:
Ron Pickard: [email protected]
Dave Heald: [email protected]
For policy questions, send mail to:
Richard Nute: [email protected]
Jim Bacher: [email protected]
Archive is being moved, we will announce when it is back on-line.
All emc-pstc postings are archived and searchable on the web at:
http://www.ieeecommunities.org/emc-pstc
_____________________________________________________________________
This e-mail has been scanned for viruses by the WorldCom Internet Managed
Scanning Service - powered by MessageLabs. For further information visit
http://www.worldcom.com
*************************************************************************
Copyright ERA Technology Ltd. 2002. (www.era.co.uk). All rights reserved.
The information supplied in this Commercial Communication should be treated
in confidence.
No liability whatsoever is accepted for any loss or damage
suffered as a result of accessing this message or any attachments.
_____________________________________________________________________
This e-mail has been scanned for viruses by the WorldCom Internet Managed
Scanning Service - powered by MessageLabs. For further information visit
http://www.worldcom.com
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.
Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/
To cancel your subscription, send mail to:
[email protected]
with the single line:
unsubscribe emc-pstc
For help, send mail to the list administrators:
Ron Pickard: [email protected]
Dave Heald: [email protected]
For policy questions, send mail to:
Richard Nute: [email protected]
Jim Bacher: [email protected]
Archive is being moved, we will announce when it is back on-line.
All emc-pstc postings are archived and searchable on the web at:
http://www.ieeecommunities.org/emc-pstc
