Dear Brian, most European approval agencies accept an CSA approved blower also for Europe. It means, that the f - fammability - motor blocking - motor overlaod is checked already.
For CE-mark (= self declaration) above is sufficient. With best regards Horst INNOVA Product Service GmbH Ampferweg 6 Germany 87677 Stöttwang Tel: (49) 8345-952727 Von: [email protected] [mailto:[email protected]]Im Auftrag von [email protected] Gesendet: Freitag, 21. Februar 2003 16:05 An: [email protected] Betreff: Blower Motor w/ European approval We use a UL and CSA blower motor (230Volt 50/60hz) in one of our Instruments (Lab Equipment). We want to get the CE marking on this product so we are looking for a drop in replacement motor that would have a European Safety agency approval. The current motor is a standard blower motor like the ones used in a bathroom ventilator. I'm having a hard time finding one with a European approval. If anyone knows of a US source for such a motor, please email me at the address below. Thank you, Brian Kunde LECO Corp. [email protected] This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] Archive is being moved, we will announce when it is back on-line. All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] Archive is being moved, we will announce when it is back on-line. All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
