Muriel,
I would suggest leaving them inside connected by a length of wire that is somewhat representative of the size of the final application. Best yet, do it both ways and see if it makes a diference. Regards, Brent DeWitt "Muriel Bittencourt de Liz" <[email protected]>@majordomo.ieee.org on 20-02-2003 12:21:38 PM Please respond to "Muriel Bittencourt de Liz" <[email protected]> Sent by: [email protected] To: "EMC-PSTC List" <[email protected]> cc: Subject: About Radiated Measurements Group, I have a doubt concerning radiated emissions measurement: - For radiated emissions measurement of switched mode power supplies using a TEM cell, should I leave the loads of the supply inside or outside the cell?? My TEM cell have filtered connections for DC loads. Thanks in advance for your help. Best Regards, Muriel This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] Archive is being moved, we will announce when it is back on-line. All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] Archive is being moved, we will announce when it is back on-line. All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
