Philip Ross Wellington wrote:
>> I do not recommend that you use heavy filtering at the chamber egress wall to control emissions for a couple of reasons... << Valid statements. However, it's necessary to control chamber ingress, otherwise the test would be contaminated by the outside EM environment and no good test could be done. An external signal filter does that. We heavily filter POWER, after all, and for the same reasons. Cortland This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] Archive is being moved, we will announce when it is back on-line. All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
