Brian - Irrespective of the source, IEC60950-1 does contain a Clause 7 and a Subclause 1.2.13.4. The EN version should not be missing these portions of the document. Perhaps you need to take IHS to task for providing an incomplete or defective copy of the standard.
Regards, Peter L. Tarver, PE Product Safety Manager Sanmina-SCI Homologation Services San Jose, CA [email protected] From: [email protected] Sent: Wednesday, February 19, 2003 6:47 AM Good People of EMC-PSTC Please note the original post below. The standard is EN 60950:2000, incorporating Corrigendum No. 1, reproduced by Global Engineering Documents, and produced under licence >from BSI. (Rich Nute, pls advise if this is not text only) R/S, Brian This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] Archive is being moved, we will announce when it is back on-line. All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
