Everybody
We have a Holaday 4433 HSE field strength probe and would like to use this
to establish an area of uniform field in the manner described in
EN61000-4-3. This requires that the field is levelled at up to 16 points
at 0.5m spacing over an area of 1.5 square meters. However, the standard
does not give any tolerance on the spacing of the probe. Does anybody have
any experience with interpretation of this requirement by assessment
authorities egg UKAS?
Ian Gordon
_____________________________________________________________________
This e-mail has been scanned for viruses by the WorldCom Internet Managed
Scanning Service - powered by MessageLabs. For further information visit
http://www.worldcom.com
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.
Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/
To cancel your subscription, send mail to:
[email protected]
with the single line:
unsubscribe emc-pstc
For help, send mail to the list administrators:
Ron Pickard: [email protected]
Dave Heald: [email protected]
For policy questions, send mail to:
Richard Nute: [email protected]
Jim Bacher: [email protected]
Archive is being moved, we will announce when it is back on-line.
All emc-pstc postings are archived and searchable on the web at:
http://www.ieeecommunities.org/emc-pstc
