Joe, This amendment has already been published in the OJ. It is included in the list of harmonized standards for the EMC Directive that was published on December 7, 2002. I haven't kept the previous list, so I can't say if this was the first listing, but based on the date of the amendment, I doubt that this was the first listing. You must use amendment 1 to CISPR 24 (actually, Amendment A1:2001 to EN 55024:1998) on all products marketed in the EU by 1 October 2004. You have the ability to use it now. Get a copy of the European amendment to make sure that there aren't any common modifications that change it from the text of Amendment 1 to CISPR 24.
Ghery Pettit Intel Corporation From: [email protected] [mailto:[email protected]] Sent: Friday, March 07, 2003 6:06 PM To: [email protected]; [email protected] Subject: Amendment 1 to CISP24:1997 adopted in EU? Hello All: The conducted immunity limits for voice equipment in Tables A.1, A.2, A.3, and A.4 of EN 55024:1998 are very difficult to meet. I have a copy of the IEC Amendment 1 to CISPR 24, dated July 2001, that significantly relaxes these limits. Was this amendment ever adopted by the EU to become part of EN 55024? If not, is there any likelihood that it will be adopted soon? Thanks, Joe Randolph Telecom Design Consultant Randolph Telecom, Inc. 781-721-2848 [email protected] http://www.randolph-telecom.com This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] Archive is being moved, we will announce when it is back on-line. All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] Archive is being moved, we will announce when it is back on-line. All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
